Drip Irrigation
Drip Irrigation >> Products
Products
Main and Submain Pipes
- HDPE / RPVC ISI Marked pipes
- Size 40mm to 160mm
- Pressure rating 2.5kg to 6kg/cm3
On-line Drip Lateral Pipe
- Available 12mm, 16mm & 20 mm OD.
- Lateral Pipe As per IS : 12786-89 under BIS License No. CM/L 6201646
- ISI Marked Laterals
- Best Quality Vergin LLDPE material used to ensure prolonged life
Screen Filters
- As per IS 12785:89 ISI marked filters
- Single or Double, with 120 to 150 mesh screen & disc filters 10, 20, 30 & 40m'/H
- Filtering capacity with 2", 2.5" & 3" size
- To filter solid impurities like sand etc.,
Sand / Gravel Filters
- Size 10, 20, 30 & 40m'/H capacity
- Used when water source is dam, pond, openwell or
- Water discharge 2,4 & 8 LPH
- Pressure compensation drippers are also available
Disc Filters
- Manufactured from reinforced engineering plastic material.
- Different filtration element options offers flexibility in selection of filters.
- Maximum operating pressure - 6 kg/cm²
- Plastic element with stainless steel mesh, to give maximum filtration area
Drippers / Emitters
- As per IS 13487:92 under license No. CM/L 6290267
- On line type-openable drippers
- Water discharge 2,4 & 8 LPH
- Pressure compensation drippers are also available
In-Line Drip Lateral Pipe
(Integral)
- 12mm, 16mm & 20 mm OD Lateral Pipe.
- As per IS 13488:92
- Dripper discharge 2, 4 & 8 lph
- Dripper spacing 20cm to 150cm
Drip Irrigation Tape
- 16mm & 20mm OD
- Emitter spacing 20mm
- Discharge 1 lph Operating pressure
- 0.3 kg/cm2 Low cost running length
Control Valves (Ball Valves)
- Size 20mm to 110mm
- 100% leak proof
- Operating temperature 40oc to 60oc
- Operating pressure upto 10kg
Microtube
- As per IS 14482:97
- 1, 1.2, 1.5 & 2mm ID & 3.2mm OD
- Water discharge 4 to 20 ltrs. / hour
- Cost effective, No clogging & widely used in level fields
Ventury
- Used to supply soluble fertilizers, pesticide etc.,
- Used to give acid / chlorine treatment to clear cloging.
- Mfg. From non-corrosive plastic material.
- Operating at low pressure.
- Capacity upto 100 L/Hour
| Pressure kg. | Discharge |
|---|---|
| 0.1 | 150 |
| 0.5 | 250 |
| 1.0 | 350 |
| 1.5 | 450 |
PVC & Poly Fittings
- Mgf. From vegin poly propelene material
- Tee, Connector, Takeout, End Plug.
- Reducing Tee & Connector Taps etc.,
- Are available in a 3, 5, 12, 16, & 20mm size.
- PVC fitting from 20mm to 110mm size.
